12V DC, 3 Amp switch mode plug pack supplied with a fixed positive to tip 2.1mm DC jack (2.1ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved.
 
Features
Australian Standards Compliant
Suitable for a range of electronic devices
Compatible with Australian mains power point
 
Specifications
Input
Rated Input Voltage: 100-240V AC
Operating Range: 90-264V AC
Rated Input Frequency: 50/60Hz
Variation Frequency: 50/60Hz +/- 3Hz
Rated Input Current: 0.8A Max.
Primary Current Protection: An adequate internal fuse on the AC input line is provided
Power Consumption (no loading): 0.1W Max. (Input voltage 115V and 230V)
Configuration: II Conductor
AC Leakage Current: 0.25mA (Max) @ 240V AC input
 
Output
DC Output Voltage: 12V DC
Minimum Load Current: 0.01A
Rating Load Current: 3A
Rating Output Power: 36W
Line Regulation: The line regulation is less than ±5% while measuring at rated load and +/-10% of input voltage changing.
Load Regulation: The load regulation for +12V is less than ±5%, at measured output load from 0% to 100% rated load
 
General
Temperature: Operating: 0°C +40°C, Non-Operating: -20°C +80°C
Humidity: Operating: 10%~90% (Non Condensing), Non-Operating: 10%~90% (Non Condensing)
Barrel Length: 10mm
Plug Tip Type: 5.5mm outer diameter and 2.1mm inside diameter
Polarity: Positive centre
Cable Length: 1.8m
MEPS Efficiency Level: VI
Dimensions: 49W x 85H x 42D mm.