Neutrik NC3MXX 3 Pin Line XLR male connector with silver finish. Neutrik connectors are made from rugged die cast aluminium and are designed to be compact yet stand up to the rigours of everyday use. Connector assembly is designed to be as simple as possible, saving you time when making cables.
 
 
 
Specifications:
 
Electrical
Capacitance between contacts: = 4 pF
Contact resistance: = 3 mΩ (inner)
Dielectric strength: 1,5 kVdc
Insulation resistance: >10 GΩ (initial)
Rated current per contact: 16A
Rated voltage: < 50V
 
Mechanical
Cable O.D.: 3.5 - 8.0 mm
Insertion force: = 20 N
Withdrawal force: = 20 N
Lifetime: >1000 mating cycles
Wire size max.: 2.5 mm² (14AWG)
Wiring: Solder contacts
Locking device: Latch lock
 
Material
Boot: Polyurethane
Contact plating: 2 µm Ag
Contacts: Brass (CuZn39Pb3)
Insert: Polyamide (PA 6.6 30 % GR)
Locking element: Zinc die cast (ZnAl4Cu1)
Shell: Zinc die cast (ZnAl4Cu1)
Shell plating: Nickel
Strain relief: Polyacetal (POM)
 
Environmental
Flammability: UL 94 HB
Standard compliance: IEC 61076-2-103
Protection class: IP 40
Solderability: Complies with IEC 68-2-20
Temperature range: -30 °C to +80 °C
 
Features:
Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Sleek and ergonomic design - valuable and handy
Rugged zinc die cast shell, long lasting and dependable
Internal thread on shell is well protected against any damage